The SCANSTA112 extends the IEEE Std. 1149.1 test bus into a multidrop test bus
environment. The advantage of a multidrop approach over a single serial scan chain is improved test
throughput and the ability to remove a board from the system and retain test access to the
remaining modules. Each SCANSTA112 supports up to 7 local IEEE1149.1 scan chains which can be
accessed individually or combined serially.
Addressing is accomplished by loading the instruction register with a value matching that
of the Slot inputs. Backplane and inter-board testing can easily be accomplished by parking the
local TAP Controllers in one of the stable TAP Controller states via a Park instruction. The 32-bit
TCK counter enables built in self test operations to be performed on one port while other scan
chains are simultaneously tested.
The STA112 has a unique feature in that the backplane port and the LSP0 port are
bidirectional. They can be configured to alternatively act as the master or slave port so an
alternate test master can take control of the entire scan chain network from the LSP0 port while
the backplane port becomes a slave.