The SN74LV541AT is designed for 4.5-V to 5.5-V VCC operation. The
inputs are TTL-voltage compatible, which allows them to be interfaced with bipolar outputs and
3.3-V devices. The device also can be used to translate from 3.3 V to 5 V.
This device is ideal for driving bus lines or buffer memory address registers. It
features inputs and outputs on opposite sides of the package to facilitate printed circuit board
layout.
The 3-state control gate is a two-input AND gate with active-low inputs so that, if
either output-enable (OE1 or OE2) input is high, all
corresponding outputs are in the high-impedance state. The outputs provide noninverted data when
they are not in the high-impedance state.
To ensure the high-impedance state during power up or power down,
OE shall be tied to VCC through a pullup resistor; the minimum value of the
resistor is determined by the current-sinking capability of the driver.
This device is fully specified for partial-power-down applications using
Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
