Designed
for overcurrent protection applications, the INA300 is a current-sensing comparator that
detects overcurrent by measuring the voltage developed across a shunt resistor, and
comparing that voltage to the threshold voltage input level. The device measures this differential voltage
signal on common-mode voltages that can vary from 0 V up to 36 V, independent of the supply
voltage. The INA300 device features an adjustable threshold range that is
set using a single external limit-setting resistor. A selectable hysteresis feature enables
adjustable operation of the comparator to accommodate the wide input signal range of 0 mV to
250 mV.An open-drain alert output on
the device can be configured to operate in either a transparent mode where the output status
follows the input state, or in a latched mode where the alert output is cleared when the
latch is cleared. The device response time setting is selectable, which enables overcurrent
alerts to be issued in as fast as 10 µs.The INA300 device operates from a single 2.7-V to 5.5-V
supply, drawing a maximum supply current of 135 µA. The INA300 device is specified over the extended
operating temperature range of –40°C to +125°C, and is available in WSON-10 and VSSOP-10 packages.